Integrated Gas Pressure Vacuum Dewaxing Metal Sintering Furnace 2200 Degree Celsius
Applications: for cemented carbide, precision ceramic, stainless steel, iron-based alloy, copper-based alloy, aluminum products.
Functions: Vacuum sintering, Gas pressure sintering, H2 dewaxing, vacuum heating, heating with gas mixture(CO2 /CH4/H2), heating flowing gas, rapid cooling.
It is mainly used for dewaxing (Ar carrier gas dewaxing/H2 gas micro-positive pressure dewaxing), vacuum sintering, partial pressure sintering (stationary/flowing), pressure sintering, rapid cooling of cemented carbide. It meets the strict requirements for furnace temperature uniformity and atmosphere uniformity of cemented carbide in its sintering process, and the furnace structure is advanced and reasonable in design, which is easy to use, operate and maintain. The main supporting components (control elements, sensors, graphite heaters, thermocouples, main control valves, vacuum pumps, etc.) are of today's international advanced level and can adapt to the requirements of long-term, stable and reliable mass production. At the same time, the equipment meets the national requirements for energy saving and environmental protection.
Part of technical parameters:
|
Valid working space(W*H*L)
|
400mm×400mm×1200mm |
|
Design Pressure
|
60bar |
|
Working Pressure
|
58bar |
|
Pressuring time
|
Less than 20 min. (up to 58 bar, air source pressure is between 80bar-100bar)
|
| Cooling speed |
≤7h(empty furnace,from 1450℃ cooling down to 100℃, water temperature≤26℃,55 bar≤Ar pressure≤58 bar)
|
|
Max.loading weight
|
500Kg(The load capacity depends on the product type) |
|
Heating power
|
320KVA |
|
Design service life
of the furnace shell
|
20 years
|
|
Max. Design Temp.
|
1600℃(under vacuum sintering)
|
|
Max. Working Temp.
|
1550℃(under vacuum and gas preesure condition)
|
|
Pumping speed
|
The vacuum degree can reach 5Pa within 30min after starting the pump. After reaching 5Pa and then pumping for 60min, the ultimate vacuum value reaches 1Pa (within a cold, empty and clean furnace that has been dried before).
|
|
Leakage rate
|
≤3Pa/h (stop the pump group operation and start checking after testing the limit vacuum (within a cold, empty and clean furnace that has been dried before).
|
|
High pressure Ar gas filling
|
It adopts intermittent and stable inflation, and the inflation time can be set. The system accurately matches the relationship between inflation volume and time to ensure the followability of inflation.
|
|
Wax Collection Rate
|
≥98%(10Kg pure paraffin, argon negative pressure dewaxing. Measured by three times of mean values at most).
|
|
UPS guarantee time
|
It can power the indicator light and control the furnace during power outage for more than 80 minutes.
|
|
Max.heating rate
|
≤8℃/min ( full load, half-way insulation is allowed)
|
|
Hot zone temp. uniformity
|
In the process of vacuum and pressure sintering, the temperature uniformity of pressure (58bar) is 1450℃: high pressure gas is filled at the maximum allowable speed, and the temperature fluctuation of thermocouple is ≤±5℃.
|
|
Sintering zone atmosphere uniformity
|
UNIFORMITY (Through dewaxing & pressure sintering): same type furnace control piece (YC40 or YG6 medium particles), paraffin, PEG, evenly distributed on the flat boat. Furnace control piece and process provided by the buyer, seller confirms.
Cobalt magnetism: test it after dewaxing, COM: ≤±0.2%;
Coercive force: HC:≤±0.3KA/M, the temperature uniformity in the furnace is mainly based on the test performance of the furnace control plate.
|
Product Tags:
|
|
Integrated Gas Pressure Vacuum Dewaxing Metal Sintering Furnace 2200 Degree Celsius Images
|
